**Welcome!** This page includes full instructions to assembling the [Public Lab Foldable Mini-Spectrometeter](http://store.publiclaboratory.org/products/foldable-mini-spectrometer). ****
**** This page is being actively improved, so be sure to check back soon to see if more content has been added. ##Using your spectrometer Once you've assembled your spectrometer and are ready to use it, plug it in and visit [SpectralWorkbench.org](https://spectralworkbench.org) to begin recording data with it. The web-based software works in the **Chrome and Opera browsers** with more coming soon. ##(Peer) Support Public Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, [register on this site](/user/register) and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! ##Resources * more [Assembly instructions](/wiki/spectrometer-construction) * [Using the software](/wiki/spectral-workbench-usage) * [Background about the project](/tool/spectrometer) * peer-contributed [research on open source spectrometry](/notes/spectrometer) ##Make your own## Whether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: [8.5x11mini-spec3.8.pdf](http://old.publiclab.org/sites/default/files/8.5x11mini-spec3.8.pdf) (550 kB) ##Assembly Photos## Cut out along the outer edge if not already cut out. Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up. Glue or tape together. Start with the top flap and make sure the edges are aligned. Except for the Diffraction grating on door, glue or tape all flaps down to the outside. To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer. Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed. Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer. ##Illustrated Assembly Guide## Cut out along the outer edge if not already cut out. Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up. Except for the Diffraction grating on door, glue or tape all flaps down to the outside. To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer. Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed. Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer. #[get started with Spectralworkbench](/wiki/spectral-workbench-usage)#