Public Lab Wiki documentation

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Buckets are a valuable tool for communities living next to oil refineries, fracking sites, and other kinds of petrochemical operations. They test for chemicals like benzene, hydrogen sulfide, perchloroethylene, and vinyl chloride, as well as other volatile organic compounds (VOCs) and sulfur compounds that are gases in the ambient air. Above all, they allow communities living net to petrochemical facilities to take control of their air. If that's you, keep reading!

Why use the bucket?

A fit for purpose tool

Health Impacts of Petrochemical Production

Building a campaign

Where should I start?

Think a bucket could be the right tool for you? This page includes links to everything you need (we hope) to learn how to use the bucket to achieve your goals. The resources here were developed in a collaboration that included Public Lab, the Fair Tech Collective, the South Durban Community Environmental Alliance, and groundWork.

How to build a bucket monitor

Learn about the materials you will need to build a bucket monitor and where you can find them. We will also take you step-by-step through the building process and ways to troubleshoot your bucket. If crafting is not for you, follow this link to buy a pre-made bucket monitor.

How to take a sample with a bucket monitor

Find out how to use your bucket monitor to get the most accurate and relevant data for you. We will take you through how to pick a location, how to manually take a sample, and how to get the sample ready for lab analysis.

Finding a lab

Once you have your sample, you'll need to send it to a lab for analysis. We'll explain how to find a lab and what to expect from your interaction with them.

How to use your bucket data

Learn how to go from numbers to a persuasive message about the pollution in your community and what to do about it.

Who else is involved?

History of the bucket monitor

Learn more about the invention of the bucket monitor as well as various bucket monitoring networks currently in use.

Bucket successes

Bucket monitoring data has helped communities reduce pollution, get enforcement action, and push for new legislation. Learn more here about others experiences using buckets to make change.

Activities

[activities:bucket-monitor]

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Buckets are still relevant for many communities, especially those in close proximity to oil refineries, fracking sites, and other kinds of petrochemical operations. They test for chemicals like benzene, hydrogen sulfide, perchloroethylene, and vinyl chloride, as well as other volatile organic compounds (VOCs) and sulfur compounds that are gases in the ambient air. They can't be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

Think a bucket could be the right tool for you? This page includes links to everything you need (we hope) to learn how to use the bucket to achieve your goals. The resources here were developed in a collaboration that included Public Lab, the Fair Tech Collective, the South Durban Community Environmental Alliance, and groundWork.

Why use the bucket?

Where should I start?

How to build a bucket monitor

Learn about the materials you will need to build a bucket monitor and where you can find them. We will also take you step-by-step through the building process and ways to troubleshoot your bucket. If crafting is not for you, follow this link to buy a pre-made bucket monitor.

How to take a sample with a bucket monitor

Find out how to use your bucket monitor to get the most accurate and relevant data for you. We will take you through how to pick a location, how to manually take a sample, and how to get the sample ready for lab analysis.

Finding a lab

Once you have your sample, you'll need to send it to a lab for analysis. We'll explain how to find a lab and what to expect from your interaction with them.

How to use your bucket data

Learn how to go from numbers to a persuasive message about the pollution in your community and what to do about it.

Who else is involved?

History of the bucket monitor

Learn more about the invention of the bucket monitor as well as various bucket monitoring networks currently in use.

Bucket successes

Bucket monitoring data has helped communities reduce pollution, get enforcement action, and push for new legislation. Learn more here about others experiences using buckets to make change.

Activities

[activities:bucket-monitor]

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Buckets are still relevant for many communities, especially those in close proximity to oil refineries, fracking sites, and other kinds of petrochemical operations. They test for chemicals like benzene, hydrogen sulfide, perchloroethylene, and vinyl chloride, as well as other volatile organic compounds (VOCs) and sulfur compounds that are gases in the ambient air. They can't be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

Think a bucket could be the right tool for you? This page includes links to everything you need (we hope) to learn how to use the bucket to achieve your goals. The resources here were developed in a collaboration that included Public Lab, the Fair Tech Collective, the South Durban Community Environmental Alliance, and groundWork.

Where should I start?

How to build a bucket monitor

Learn about the materials you will need to build a bucket monitor and where you can find them. We will also take you step-by-step through the building process and ways to troubleshoot your bucket. If crafting is not for you, follow this link to buy a pre-made bucket monitor.

How to take a sample with a bucket monitor

Find out how to use your bucket monitor to get the most accurate and relevant data for you. We will take you through how to pick a location, how to manually take a sample, and how to get the sample ready for lab analysis.

I have a sample, what now?

Finding a lab

Once you have your sample, you'll need to send it to a lab for analysis. We'll explain how to find a lab and what to expect from your interaction with them.

How to use your bucket data

Learn how to go from numbers to a persuasive message about the pollution in your community and what to do about it.

Who else is involved?

History of the bucket monitor

Learn more about the invention of the bucket monitor as well as various bucket monitoring networks currently in use.

Bucket successes

Bucket monitoring data has helped communities reduce pollution, get enforcement action, and push for new legislation. Learn more here about others experiences using buckets to make change.

Activities

[activities:bucket-monitor]

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Buckets are still relevant for many communities, especially those in close proximity to oil refineries, fracking sites, and other kinds of petrochemical operations. They test for chemicals like benzene, hydrogen sulfide, perchloroethylene, and vinyl chloride, as well as other volatile organic compounds (VOCs) and sulfur compounds that are gases in the ambient air. They can't be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

Think a bucket could be the right tool for you? This page includes links to everything you need (we hope) to learn how to use the bucket to achieve your goals. The resources here were developed in a collaboration that included Public Lab, the Fair Tech Collective, the South Durban Community Environmental Alliance, and groundWork.

Where should I start?

How to build a bucket monitor

Learn about the materials you will need to build a bucket monitor and where you can find them. We will also take you step-by-step through the building process and ways to troubleshoot your bucket. If crafting is not for you, follow this link to buy a pre-made bucket monitor.

How to take a sample with a bucket monitor

Find out how to use your bucket monitor to get the most accurate and relevant data for you. We will take you through how to pick a location, how to manually take a sample, and how to get the sample ready for lab analysis.

I have a sample, what now?

Finding a lab

Once you have your sample, you'll need to send it to a lab for analysis. We'll explain how to find a lab and what to expect from your interaction with them.

How to use your bucket data

Learn how to go from numbers to a persuasive message about the pollution in your community and what to do about it.

Who else is involved?

History of the bucket monitor

Learn more about the invention of the bucket monitor as well as various bucket monitoring networks currently in use.

Bucket successes

Bucket monitoring data has helped communities reduce pollution, get enforcement action, and push for new legislation. Learn more here about others experiences using buckets to make change.

Activities

[activities:bucket-monitor]

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Buckets are still relevant for many communities, especially those in close proximity to oil refineries, fracking sites, and other kinds of petrochemical operations. They test for chemicals like benzene, hydrogen sulfide, perchloroethylene, and vinyl chloride, as well as other volatile organic compounds (VOCs) and sulfur compounds that are gases in the ambient air. They can't be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

Think a bucket could be the right tool for you? This page includes links to everything you need (we hope) to learn how to use the bucket to achieve your goals. The resources here were developed in a collaboration that included Public Lab, the Fair Tech Collective, the South Durban Community Environmental Alliance, and groundWork.

Where should I start?

How to build a bucket monitor

Learn about the materials you will need to build a bucket monitor and where you can find them. We will also take you step-by-step through the building process and ways to troubleshoot your bucket. If crafting is not for you, follow this link to buy a pre-made bucket monitor.

How to take a sample with a bucket monitor

Find out how to use your bucket monitor to get the most accurate and relevant data for you. We will take you through how to pick a location, how to manually take a sample, and how to get the sample ready for lab analysis.

I have a sample, what now?

Finding a lab

Once you have your sample, you'll need to send it to a lab for analysis. We'll explain how to find a lab and what to expect from your interaction with them.

How to use your bucket data

Learn how to go from numbers to a persuasive message about the pollution in your community and what to do about it.

Who else is involved?

History of the bucket monitor

Learn more about the invention of the bucket monitor as well as various bucket monitoring networks currently in use.

Bucket successes

Bucket monitoring data has helped communities reduce pollution, get enforcement action, and push for new legislation. Learn more here about others experiences using buckets to make change.

Activities

[activities:bucket-monitor]

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

<–><> The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample. (Shannon Dosemagen and Gwen Ottinger) Read more here.

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

For this project Public labs teamed up with the South Durban Community Environmental Alliance, Groundwork, and Fair Tech Collective to take you through all the information you need to monitor your own air quality, or establish your own bucket network

In this series we will introduce you to:

How to build a bucket monitor

Learn about the materials you will need to build a bucket monitor and where you can find them. We will also take you step-by-step through the building process and ways to troubleshoot your bucket. If crafting is not for you, follow this link to buy a premade bucket monitor.

How to take a sample with a bucket monitor

Find out how to use your bucket monitor to get the most accurate and relevant data for you. We will take you through how to pick a location, how to manually take a sample, and how to get the sample ready for lab analysis.

How to interpret your bucket data

Bucket monitoring data can serve a variety of purposes ranging from informing community

Uses of bucket monitoring data

Bucket monitoring data can serve a variety of purposes ranging from informing community members about their exposure risk to helping push for new legislation to regulate refineries emissions levels. Learn more here about what others have been able to do as a result of monitoring data as well as options you have to best meet your monitoring goals.

History of the bucket monitor

Learn more about the invention of the bucket monitor as well as case studies about its implementation in Tonawanda and South Durban.

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

If you have questions about this project, please email Katie Gradowski, Community Tech Fellow for Public Lab and Fair Tech Collective. You can connect with her on Public Lab at @kgradow1 or by email.

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Activities

[activities:bucket-monitor]

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

If you have questions about this project, please email Katie Gradowski, Community Tech Fellow for Public Lab and Fair Tech Collective. You can connect with her on Public Lab at @kgradow1 or by email.

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Activities

[activities:bucket-monitor]

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

If you have questions about this project, please email Katie Gradowski, Community Tech Fellow for Public Lab and Fair Tech Collective. You can connect with her on Public Lab at @kgradow1 or by email.

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Questions

[activities:bucket-monitor] [questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

If you have questions about this project, please email Katie Gradowski, Community Tech Fellow for Public Lab and Fair Tech Collective. You can connect with her on Public Lab at @kgradow1 or by email.

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

If you have questions about this project, please email Katie Gradowski, Community Tech Fellow for Public Lab and Fair Tech Collective. You can connect with her on Public Lab at @kgradow1 or by email.

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

If you have questions about this project, please email Katie Gradowski, Community Tech Fellow for Public Lab and Fair Tech Collective. You can connect with her on Public Lab at @kgradow1 or by email.

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

If you have questions about this project, please email Katie Gradowski, Community Tech Fellow for Public Lab and Fair Tech Collective. You can connect with her on Public Lab at @kgradow1 or by email.

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project

The “bucket” is a low-cost, community-friendly air sampler that helps people measure toxic chemicals such as benzene and hydrogen sulfide in their air. Developed in the late 1990s, it was one of the first (if not the very first) do-it-together environmental monitors. Communities living near oil refineries and petrochemical plants gathered to build their own buckets. They established phone trees to make sure that, when noxious fumes enveloped their neighborhood, someone would take a sample.

Shannon Dosemagen and Gwen Ottinger, “Updating and Open Sourcing a Community Based Tool”

Vision

We believe the bucket is a critical part of the air quality toolkit. Over the next eight months we will be collecting documentation to create an open source, digitized manual and kit for the bucket monitor. We will be documenting bucket brigades as an organizing model, highlighting cases where groups have used buckets successfully to make change. We will be putting an open source version of the bucket in the Public Lab store and sharing design documents and part lists for anyone who wants to source materials and build it themselves.

Lastly, through our OpenHour calls, Q&A, and this project page, we will create a space for bucket users — past, present, and future — to connect with each other and share knowledge and best practices about this tool.

How it Works

How do I build one? The bucket is a “grab sample” tool that you can build using parts from your local hardware store. The original version used a Home Depot bucket, a Tedlar bag, a small vacuum, and a simple valve. There have been different versions over the years but they all work the same way:

• The vacuum sucks air out of the bucket.
• The valve is opened and a sample of the air is pulled into the Tedlar bag
• The bag is removed and sent to a lab for analysis.

Image courtesy of Communities for a Better Environment (CBE), which published the original bucket brigade manual in 1999 and was one of the earliest groups to use this tool. Click here to read the full manual, reposted with permission:

Bucket_manual.pdf

What does the bucket test for?

Buckets test for chemicals (gases) in the air, including volatile organic compounds (VOCs) and sulfur compounds: for instance, hydrogen sulfide, perchloroethylene, vinyl chloride, toluene, and benzene. They cannot be used to test particulate matter (PM), heavy metals, soot, dust, or solids.

What is a bucket brigade? A group of people who are “on deck” to take an air sample in case of a suspected pollution event. The original bucket brigades used “sniffers” and “samplers” and envisioned a network of buckets supported by smell logs and complaint forms.

Project History

The bucket brigade model was developed by Denny Larson, by organizers at Louisiana Bucket Brigade and Communities for a Better Environment, and by Global Community Monitor, which stewarded the bucket project from 2001-2016 and until recently was the primary repository for this information.

Over the course of its fifteen year history, GCM worked with over 40 organizations worldwide to train people on the bucket brigade organizing model. Organizations that have successfully used buckets include:

• Global Community Monitor
• Louisiana Bucket Brigade (with Concerned Citizens of Norco, Concerned Citizens of New Sarpy, St. Bernard Citizens for Environmental Quality, and the Chalmette Air Monitoring Project)
• Contra Costa Bucket Brigade (with support from the EPA)
• Communities for a Better Environment
• Blue Ridge Environmental Defense League
• groundWork: Environmental Justice Action
• Community in Power and Development Organization (CIDA)
• Clean Air Coalition of Western New York (CACWNY)
• Citizen Science Community Resources (CSCR)
• Air Alliance Houston

More resources and groups who have experience with the Bucket: http://www.pbs.org/pov/fenceline/the-bucket-brigade/ http://www.labucketbrigade.org/content/bucket

Is Public Lab creating a bucket brigade? No. We are collecting documentation and best practices for how the bucket has been used in successful campaigns. If you are starting a bucket brigade and want to learn from past models, we hope this will be a useful resource in helping you get started.

Who is Involved?

This project is a collaboration between Public Lab and the Fair Tech Collective at Drexel University, and is funded by a grant from the 11th Hour Foundation. We are indebted to the work of Global Community Monitor, Louisiana Bucket Brigade, Communities for a Better Environment, and self-organizing and regional bucket brigades around the world and are largely working within the frame that they have created, including decades of work building buckets, refining their design, and developing a model for integrating buckets into organizing.

• Shannon Dosemagen: Shannon has spent the last 20 years working with environment and public health groups to address declining freshwater resources, coastal land loss and building monitoring programs with communities. She is currently a Shuttleworth Foundation Fellow working on the Open Environmental Data Project, co-founder of Public Lab, Executive Director from 2010-20 and current Organization Advisor, a steward of the Gathering for Open Science Hardware, member of the Union of Concerned Scientists Science Advocacy working group, and previous Chair of both the U.S. EPA National Advisory Council on Environmental Policy and Technology and the Citizen Science Association. For more information about Shannon's work find her on Twitter @sdosemagen.

• Gwen Ottinger: Gwen is Associate Professor at Drexel University, where she directs the Fair Tech Collective, a research group devoted to learning how science and technology can best promote social and environmental justice. She is the recipient of a CAREER award from the National Science Foundation and as part of her research, Gwen led a collaboration to develop Air Watch Bay Area, a site that curates data on air quality around oil refineries in northern California and enables fenceline communities to report smells and flaring. Gwen has been involved with bucket brigades since 2001 and has been on Public Lab’s Board of Directors since 2016.

• Katie Gradowski: Katie has been a part of the Public Lab community for the past six years, participating in a diverse range of projects including aerial mapping of community gardens, educational applications for the Public Lab spectrometer, and community microscopes. Her background is in out-of-school time education and housing justice work. As Community Technology Fellow, Katie will spend the next eight months updating and archiving the bucket air sampler, an affordable monitoring method for collecting grab samples in fenceline communities. You can connect with her on Public Lab at @kgradow1

What are we working on now

• May - June 2020: Research and development. Over the next two months, we will be conducting field interviews, connecting with users, posting initial documentation for the bucket manual and posting content online in the form of questions and activities.  We hope to run at least one OpenHour event focused on bucket monitoring.

• July-August 2020: Kit development, lab testing, and organizing methodologies. Over the summer we will be working to document a “train the trainers” model, sourcing material for an initial version of the Public Lab kit, and researching affordable options for lab testing for groups who need support in getting their samples tested.

• September - November 2020: Let’s test it out! Fall is for conducting field tests and finalizing documentation. Our hope is to partner with local groups who want to test this tool and provide feedback. If you’re interested in participating in this stage, email Katie or check this page for updates.

Project Outline

This project consists of four parts:

• Open Source Bucket Manual: We will be creating a version of the bucket manual that can be easily accessed online, as well as a run of hard copies for distribution. This documentation will be open source and posted on the Public Lab website under a Creative Commons Attribution Share-Alike license (CC-SY)

• Bucket Kit and Supporting Activities: We will be hosting a version of the bucket kit in the Public Lab Store and creating a set of activities and notes that describe both the technical setup and steps for how you can use the bucket to support action-based outcomes.

• Documenting Network Models and Organizing Strategies: Bucket brigades operate on a “train the trainer” model, sharing tasks and activating community members to respond quicky in a moment of crisis. How does this work in practice? How have different places adapted the bucket brigade to fit the needs of their community? How can we best support each other, in learning from diverse approaches, celebrating successful outcomes, and identifying best practices? We will identify the current landscape of bucket brigades and identify possibilities for a future distributed support network.

• Building out the Lab Network: Lab analysis is the most expensive step, and finding a lab that can run gas chromatography-mass spectrometry analysis for bucket samples can be a formidable challenge. As part of this project, we will research and identify potential lab partners for analyzing bucket samples.

Questions

[questions:bucket-monitor]

Have you used the bucket?

If you have used buckets in your own work and want to be part of this project, please email Community Technology Fellow Katie Gradowski here. We view this as a living document and are eager to collaborate with past and present users.

Updates

Are you interested in following along in the project? Subscribe to the tag below to get updates when we post new material.

Subscribe to updates on this project