Long form, community generated answers to frequently asked questions about the Infragram project ...
Public Lab is an open community which collaboratively develops accessible, open source, Do-It-Yourself technologies for investigating local environmental health and justice issues.
| 35 | donblair |
May 24, 2013 00:13
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too: http://publiclab.org/wiki/infragram-convertible-cameras Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. Which cameras can be converted with an Infragram filter? We're creating a list here: http://publiclab.org/wiki/infragram-convertible-cameras I was wondering if it is possible to get more than one filter kit? Certainly! Please include a note when you fill out your backer report to that effect. I would prefer to incorporate the camera into a watering system, i.e. take picture, evaluate plant, water if necessary. Do you have any plans to move in this direction? Yes! we are developing Infragram processing software for the Raspberry Pi. With some programming and a Raspberry Pi or other Arm Linux board, you could totally incorporate the camera. Can this be used with a smartphone camera, such as iPhone or Galaxy S III? We would love to have this functionality on cell phone cameras, but you would have to permanently modify your cell phone to capture near infrared. We can't confirm that the infrared filter is removable on any particular phone. looks like an awesome project! How much more work for a camera that can do Ultra Violet? Inexpensive digital cameras like the one's we've been building our platform around are typically sensitive down to 350 nm, depending on the particular brand; some back-illuminated CMOS sensors can register as low as around 200nm. To see more discussion on this, check out our wiki, here: http://publiclab.org/wiki/uv-spectrometry The "click and go" edition, is that coming with Sdcard slot? Most likely, yes -- the point and shoot model we've been investigating will have a micro SD card slot, useful for storing and transferring images. |
Revert | |
| 34 | donblair |
May 24, 2013 00:13
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too: http://publiclab.org/wiki/infragram-convertible-cameras Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. Which cameras can be converted with an Infragram filter? We're creating a list here: http://publiclab.org/wiki/infragram-convertible-cameras I was wondering if it is possible to get more than one filter kit? Certainly! Please include a note when you fill out your backer report to that effect. I would prefer to incorporate the camera into a watering system, i.e. take picture, evaluate plant, water if necessary. Do you have any plans to move in this direction? Yes! we are developing Infragram processing software for the Raspberry Pi. With some programming and a Raspberry Pi or other Arm Linux board, you could totally incorporate the camera. Can this be used with a smartphone camera, such as iPhone or Galaxy S III? We would love to have this functionality on cell phone cameras, but you would have to permanently modify your cell phone to capture near infrared. We can't confirm that the infrared filter is removable on any particular phone. _yet to be answered... _ looks like an awesome project! How much more work for a camera that can do Ultra Violet? Inexpensive digital cameras like the one's we've been building our platform around are typically sensitive down to 350 nm, depending on the particular brand; some back-illuminated CMOS sensors can register as low as around 200nm. To see more discussion on this, check out our wiki, here: http://publiclab.org/wiki/uv-spectrometry The "click and go" edition, is that coming with Sdcard slot? Most likely, yes -- the point and shoot model we've been investigating will have a micro SD card slot, useful for storing and transferring images. |
Revert | |
| 33 | liz |
May 23, 2013 22:21
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too: http://publiclab.org/wiki/infragram-convertible-cameras Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. Which cameras can be converted with an Infragram filter? We're creating a list here: http://publiclab.org/wiki/infragram-convertible-cameras I was wondering if it is possible to get more than one filter kit? Certainly! Please include a note when you fill out your backer report to that effect. I would prefer to incorporate the camera into a watering system, i.e. take picture, evaluate plant, water if necessary. Do you have any plans to move in this direction? Yes! we are developing Infragram processing software for the Raspberry Pi. With some programming and a Raspberry Pi or other Arm Linux board, you could totally incorporate the camera. Can this be used with a smartphone camera, such as iPhone or Galaxy S III? We would love to have this functionality on cell phone cameras, but you would have to permanently modify your cell phone to capture near infrared. We can't confirm that the infrared filter is removable on any particular phone. _yet to be answered... _ looks like an awesome project! How much more work for a camera that can do Ultra Violet? The "click and go" edition, is that coming with Sdcard slot? |
Revert | |
| 32 | liz |
May 23, 2013 22:18
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too: http://publiclab.org/wiki/infragram-convertible-cameras Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. Which cameras can be converted with an Infragram filter? We're creating a list here: http://publiclab.org/wiki/infragram-convertible-cameras **I was wondering if it is possible to get more than one filter kit? Certainly! Please include a note when you fill out your backer report to that effect. I would prefer to incorporate the camera into a watering system, i.e. take picture, evaluate plant, water if necessary. Do you have any plans to move in this direction? Yes! we are developing Infragram processing software for the Raspberry Pi. With some programming and a Raspberry Pi or other Arm Linux board, you could totally incorporate the camera. Can this be used with a smartphone camera, such as iPhone or Galaxy S III? We would love to have this functionality on cell phone cameras, but you would have to permanently modify your cell phone to capture near infrared. We can't confirm that the infrared filter is removable on any particular phone. _-- yet to be answered -- _ looks like an awesome project! How much more work for a camera that can do Ultra Violet? The "click and go" edition, is that coming with Sdcard slot? |
Revert | |
| 31 | liz |
May 23, 2013 22:17
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too: http://publiclab.org/wiki/infragram-convertible-cameras Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. Which cameras can be converted with an Infragram filter? We're creating a list here: http://publiclab.org/wiki/infragram-convertible-cameras **I was wondering if it is possible to get more than one filter kit? Certainly! Please include a note when you fill out your backer report to that effect. -- yet to be answered -- looks like an awesome project! How much more work for a camera that can do Ultra Violet? The "click and go" edition, is that coming with Sdcard slot? |
Revert | |
| 30 | warren |
May 23, 2013 17:20
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too: http://publiclab.org/wiki/infragram-convertible-cameras Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. Which cameras can be converted with an Infragram filter? We're creating a list here: http://publiclab.org/wiki/infragram-convertible-cameras |
Revert | |
| 29 | warren |
May 23, 2013 17:14
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too. Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. |
Revert | |
| 28 | warren |
May 23, 2013 17:11
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too. Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. |
Revert | |
| 27 | warren |
May 23, 2013 17:08
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the Infragram project on Kickstarter Can this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY filter large enough to attach to a SLR lens? Yes, we are sending a 4"x4" square of filter. Could it be used to help identify pigments or in some case reveal hidden things under drawings or paintings? We're not sure! Can you link to any examples of this sort of use? If we know the desired wavelengths, we could better answer the question. What's the infrared wavelength you are using? Do you plan to add far infrared filters in the 750. 850 and 950 infrared spectrum? The bands are quite wide - you can see the actual spectrum of one of the test filters in this post: http://publiclab.org/notes/cfastie/04-21-2013/rosco Because of the interest in photosynthesis, we're not targeting a narrow band, but maximizing infrared sensitivity with a broad band filter. What is the sensitivity of the CMOS sensor you are using, how many lumins? We're not sure about this, in part because we haven't made a final camera selection. We'll post the specs we have on the webcam version soon, though it is a consumer-grade webcam and may not offer raw image capture. Is it possible to stack filters with your camera? See above -- we haven't made a final camera choice yet, but since we'll be selecting a very inexpensive one, the likelihood is not high that we'll have a standard filter screw. We are looking at some standard lens mounts which could help, however... more soon. When I take a plant photograph, where is the information to help me analyzing or interpreting the color of a photo regarding the plant health? You can start by looking at the breadth of research by Public Lab members here: http://publiclab.org/tag/ndvi and http://publiclab.org/wiki/near-infrared-camera. We'll be collaboratively building out that documentation (Wikipedia-style) as we go. Is the web cam level capable of doing infra red out of the box? Meaning if I take it, plug it into my laptop or what have you, I will be able to go out in my backyard and take shots with it infrared style? If you remove the filter and add your own infrared pass (visible block) filter you'll be able to take infrared photos, yes. We have some documentation on the website to guide you on that too. Can you put the filters on a pair of glasses, and use them without needing a camera? No, because your eyes cannot see near-infrared. A CCD or CMOS camera can, but only after we remove the infrared-blocking filter. |
Revert | |
| 26 | liz |
May 23, 2013 17:06
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the InfragramCan this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY "superblue" filter large enough to attach to a SLR lense filter that can be used attached and un-attached? Yes, we are sending a 4"x4" square of filter. Yet to be answered
|
Revert | |
| 25 | liz |
May 23, 2013 17:04
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the InfragramCan this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY "superblue" filter large enough to attach to a SLR lense filter that can be used attached and un-attached? Yes, we are sending a 4"x4" square of filter. Yet to be answered
|
Revert | |
| 24 | liz |
May 23, 2013 17:04
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the InfragramCan this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY "superblue" filter large enough to attach to a SLR lense filter that can be used attached and un-attached? Yes, we are sending a 4"x4" square of filter. Yet to be answered
Operationally for the camera (in this case, the P&S), is the idea basically that the usage will be like a normal camera w/o user intervention? That is, user points camera, pushes the button once, and the camera will handle the work of capturing both a near-IR and normal color image?
|
Revert | |
| 23 | liz |
May 23, 2013 17:03
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the InfragramCan this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY "superblue" filter large enough to attach to a SLR lense filter that can be used attached and un-attached? Yes, we are sending a 4"x4" square of filter. Yet to be answeredJohn 1. Operationally for the camera (in this case, the P&S), is the idea basically that the usage will be like a normal camera w/o user intervention? That is, user points camera, pushes the button once, and the camera will handle the work of capturing both a near-IR and normal color image? 2. The online processor - what is the channel manipulation that happens? The images on the kickstarter seem to conflict. One suggests you're simply doing a swap of Red with Near-IR data, but another suggests that it would be the NearIR-R-G expressed as R-G-B processing that is closer to how color IR film operated.
|
Revert | |
| 22 | liz |
May 23, 2013 17:03
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the InfragramCan this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY "superblue" filter large enough to attach to a SLR lense filter that can be used attached and un-attached? Yes, we are sending a 4"x4" square of filter. Yet to be answeredJohn 1. Operationally for the camera (in this case, the P&S), is the idea basically that the usage will be like a normal camera w/o user intervention? That is, user points camera, pushes the button once, and the camera will handle the work of capturing both a near-IR and normal color image? 2. The online processor - what is the channel manipulation that happens? The images on the kickstarter seem to conflict. One suggests you're simply doing a swap of Red with Near-IR data, but another suggests that it would be the NearIR-R-G expressed as R-G-B processing that is closer to how color IR film operated.
|
Revert | |
| 21 | liz |
May 23, 2013 16:28
| almost 11 years ago
Long form, community generated answers to frequently asked questions about the InfragramCan this be used as a thermal imager? For example, to find hot and cold spots around my home? The short answer is that no, it cannot be used as a thermal imager--however, we have been working on a project that does just that: http://publiclab.org/wiki/thermal-camera Is the square of DIY "superblue" filter large enough to attach to a SLR lense filter that can be used attached and un-attached? Yes, we are sending a 4"x4" square of filter. Yet to be answeredSimon I work at museum and have always held an eye out for a cheap false colour IR camera, it can be used to help identify pigments or in some case reveal under drawings. I know this isnt the type of conservation you've planned but could you look into this as there are a lot of small museums out there that could make great use of the equipment?
|
Revert | |
| 20 | liz |
May 23, 2013 16:03
| almost 11 years ago
|
Revert |