|
865
|
amocorro |
January 20, 2021 22:10
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
February 8, 2021, 11:30am ET, Undermined: Voices from the Frontlines of Frac Sand Mining
The perils of fracking are well documented, but the impacts from mining fracsand are less widely known. In Undermined, we speak with the people fighting for clean air and water, fertile farmland, & sustainable livelihoods in #fenceline communities from across the midwest. Fracking is an extractive technology that has spread across massive landscapes and unzoned, small towns in the USA as industry has purchased up land rights to conduct operations. Mining for silica sand, use of chemicals, and local water all are pumped into the ground to release small pockets of oil & gas. During this OpenHour, we will hear directly from community members who have been bringing their communities together to unite in the struggles for healthy homes and justice amidst broken promises from frac sand companies. Participants will have the opportunity to ask questions during the event.
Our accompanying audio story, Undermined, is presented by Public Lab and FracTracker Alliance with support from Save the Hills Alliance. Listen here: https://soundcloud.com/publiclab/undermined
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/d56cd427
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
864
|
amocorro |
January 20, 2021 17:25
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
February 8, 2021, 11:30am ET, FracTracker
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/d56cd427
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
863
|
amocorro |
January 15, 2021 22:13
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
February 8, 2021, 11:30am ET, FracTracker
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/5f018585
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
862
|
amocorro |
January 15, 2021 22:09
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
February 8, 2021, 11:30am ET, FracTracker
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/5f018585
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
861
|
amocorro |
January 14, 2021 17:14
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
February 8, 2021, TBD ET, Undermined with FracTracker
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/5f018585
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
860
|
amocorro |
January 11, 2021 22:49
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
February 2021, TBD ET, Undermined
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/5f018585
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
859
|
amocorro |
January 11, 2021 19:49
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
Join us for a conversation about community mapping tools and movements seeking alternatives to natural gas: solar balloons! Whether you're new to this type of flight or an experienced builder join this virtual discussion, bring your questions and share your story! For the first OpenHour of 2021 we’ll look at what solar balloons are, how solar balloon design has advanced, and discuss where it might go in the future. Bring your curiosity and learn tricks for building and flying these balloons! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/5f018585
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
858
|
amocorro |
January 05, 2021 20:30
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
Join us for a conversation about community mapping tools and movements seeking alternatives to natural gas: solar balloons! Whether you're new to this type of flight or an experienced builder join this virtual discussion, bring your questions and share your story! For the first OpenHour of 2021 we’ll look at what solar balloons are, how solar balloon design has advanced, and discuss where it might go in the future. Bring your curiosity and learn tricks for building and flying these balloons! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/5f018585
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
857
|
amocorro |
January 05, 2021 20:27
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
Join us for a conversation about community mapping tools and movements seeking alternatives to natural gas: solar balloons! Whether you're new to this type of flight or an experienced builder join this virtual discussion, bring your questions and share your story! For the first OpenHour of 2021 we’ll look at what solar balloons are, how solar balloon design has advanced, and discuss where it might go in the future. Bring your curiosity and learn tricks for building and flying these balloons! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
856
|
amocorro |
January 05, 2021 20:26
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
Join us for a conversation about community mapping tools and movements seeking alternatives to natural gas: solar balloons! Whether you're new to this type of flight or an experienced builder join this virtual discussion, bring your questions and share your story! For the first OpenHour of 2021 we’ll look at what are solar balloons, how solar balloon design has advanced, and discuss where it might go in the future. Bring your curiosity and learn tricks for building and flying these balloons! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
855
|
amocorro |
January 05, 2021 20:25
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
Join us for a conversation about community mapping tools and their movements seeking alternatives to natural gas: solar balloons! Whether you're new to this type of flight or an experienced builder join this virtual discussion, bring your questions and share your story! For the first OpenHour of 2021 we’ll look at what are solar balloons, how solar balloon design has advanced, and discuss where it might go in the future. Bring your curiosity and learn tricks for building and flying these balloons! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
854
|
amocorro |
January 05, 2021 20:25
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
Join us for a conversation about community mapping tools and movements seeking alternatives to natural gas: solar balloons! Whether you're new to this type of flight or an experienced builder join this virtual discussion, bring your questions and share your story! For the first OpenHour of 2021 we’ll look at what are solar balloons, how solar balloon design has advanced, and discuss where it might go in the future. Bring your curiosity and learn tricks for building and flying these balloons! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
853
|
amocorro |
December 15, 2020 21:19
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
More details to come! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2021 OpenHours
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
852
|
amocorro |
December 11, 2020 17:37
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 11, 2021, 3pm ET, Solar Balloons
More details to come! Read more on the website here: https://publiclab.org/tag/solar-balloon
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
851
|
amocorro |
December 10, 2020 22:14
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 2021, TBD, check back soon!
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
850
|
amocorro |
December 10, 2020 22:12
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
January 2021, TBD, check back soon!
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November: Rescheduled
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
849
|
amocorro |
December 09, 2020 15:57
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
December 9, 2020, 12:00 ET, Take Back Your Air: Using the Bucket Air Quality Monitor
Join South Durban Community Environmental Alliance (SDCEA) and groundWork in a discussion hosted by Public Lab to learn about 25 years of successful organizing and air quality advocacy using the bucket in South Africa. We will discuss the history of the bucket, its use as a campaign tool, success stories from South Durban, as well as previewing the bucket toolkit and sharing resources for communities looking to do their own air quality monitoring. Facilitators + Guest Speakers: Rico Euripidou, Environmental Health Campaigner @ groundWork, Friends of the Earth South Africa; Katie Gradowski, Public Lab Community Technology Fellow; Bongani Mthembu @ SDCEA; Desmond D'Sa, Goldman Prize Recipient 2014 Africa and Co-Founder of SDCEA
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November TBD
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
848
|
liz |
December 08, 2020 19:59
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
December 9, 2020, 12:00 ET, Take Back Your Air: Using the Bucket Air Quality Monitor
Join South Durban Community Environmental Alliance (SDCEA) and groundWork in a discussion hosted by Public Lab to learn about 25 years of successful organizing and air quality advocacy using the bucket in South Africa. We will discuss the history of the bucket, its use as a campaign tool, success stories from South Durban, as well as previewing the bucket toolkit and sharing resources for communities looking to do their own air quality monitoring. Facilitators + Guest Speakers: Rico Euripidou, Environmental Health Campaigner @ groundWork, Friends of the Earth South Africa; Katie Gradowski, Public Lab Community Technology Fellow; Bongani Mthembu @ SDCEA; Desmond D'Sa, Goldman Prize Recipient 2014 Africa and Co-Founder of SDCEA
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November TBD
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
847
|
amocorro |
November 13, 2020 20:04
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
December 9, 2020, 12:00 ET, Take Back Your Air: Using the Bucket Air Quality Monitor
Join South Durban Community Environmental Alliance (SDCEA) and groundWork in a discussion hosted by Public Lab to learn about 25 years of successful organizing and air quality advocacy using the bucket in South Africa. We will discuss the history of the bucket, its use as a campaign tool, success stories from South Durban, as well as previewing the bucket toolkit and sharing resources for communities looking to do their own air quality monitoring. Facilitators + Guest Speakers: Rico Euripidou, Environmental Health Campaigner @ groundWork, Friends of the Earth South Africa; Katie Gradowski, Public Lab Community Technology Fellow; Bongani Mthembu @ SDCEA; Desmond D'Sa, Goldman Prize Recipient 2014 Africa and Co-Founder of SDCEA
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2020 OpenHours
- December 9: Take Back Your Air - Using the Bucket Air Quality Monitor
- November TBD
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|
|
846
|
amocorro |
November 10, 2020 17:01
| over 3 years ago
OpenHour is an interactive seminar hosted by the Public Lab community, both online and in person. The topics of OpenHour vary from presentations on tools and methods, discussions on environmental issues, to approaches to data-based advocacy. OpenHour is a great way to meet people in the Public Lab community. Bring your research, your ideas, and your questions, and join us for OpenHour!
- OpenHour is held the first Monday of the month.
- The time generally alternates between 8 p.m. ET in odd months and 1 p.m. ET in even months.
- See schedule below for times and topics.
- The event is hosted on Zoom -- see weblink and call-in numbers in the event info below!
- Subscribe to https://www.youtube.com/c/PublicLab to get a notification whenever an OpenHour recording is posted!
Schedule/Horario
Stay tuned for information on the upcoming OpenHour!
December 2020 (date to come), 12:00 ET, Take Back Your Air: Using the Bucket Air Quality Monitor
Join South Durban Community Environmental Alliance (SDCEA) and groundWork in a discussion hosted by Public Lab to learn about 25 years of successful organizing and air quality advocacy using the bucket in South Africa. We will discuss the history of the bucket, its use as a campaign tool, success stories from South Durban, as well as previewing the bucket toolkit and sharing resources for communities looking to do their own air quality monitoring. Facilitators + Guest Speakers: Rico Euripidou, Environmental Health Campaigner @ groundWork, Friends of the Earth South Africa; Katie Gradowski, Public Lab Community Technology Fellow; Bongani Mthembu @ SDCEA; Desmond D'Sa, Goldman Prize Recipient 2014 Africa and Co-Founder of SDCEA
Link to Join
or call in: +1 301 715 8592 Meeting ID: 812 7106 7105
International numbers available [here] (https://us02web.zoom.us/u/kOhXFb1gS)
Meeting time in every timezone:
https://everytimezone.com/s/ef7d4ed8
Past OpenHours
Click here for the OpenHour archive and watch any of the OpenHours listed below
2020 OpenHours
- December (date to come): Take Back Your Air - Using the Bucket Air Quality Monitor
- November 16: TBD
- October 5: Lessons from the Land Loss Lookout Project
- September 14: Celebrating Summer of Code 2020
- August 3: Understanding Existing Environmental Data
- July 6: Public Lab Hora Abierta
- June 8: Environmental Storytelling
- May 2: Live Build Mini Kites in coordination with NASA
- April 4: Law and Environmental Monitoring
- March 2: Particulate Matter Monitoring
- February 3: Community Science Education
2019 OpenHours
- December 9: Reflecting on OpenHour
- November 12: Monitoring for Oil in Water
- October: MAKE month! Our collaboration with Make Magazine hit newsstands in October! See more about our project on our MAKE Wiki and get your copy here.
- October 3: Build a Community Microscope
- October 5: BabyLegs Trawl Learn how to make a DIY trawl
- October 9: The Coqui and a DIY particulate sensor
- October 28: Discussing all of our kits!
- September 3: Summer of Code presentations
- August 5: Odors
- July 15: BabyLegs (monitoring ocean plastics)
- June 3: Environmental Education
- May 6: Launching Summer of Code
- April 1: Soil Testing
- March 4: Diffusion tubes test air quality in the UK
- February 4: Community Science Disaster Response Toolkit
- January 7: Lead
2018 OpenHours
- December 3: Usability Feedback for PublicLab.org
- November 5: Technology and process in working with Environmental Justice and environmental health impacted communities
- October 1: Google Code-In
- September 10: Using the new Community Microscope
- August 6: Summer of Code Projects
- July 9: Code of Conduct 3 year review
- June: (summer break, no OpenHour)
- May 7: Events
- April 1: Marine Plastics
- February 5: Developing Community Kits with Public Lab
- January 8: Exploratory hydrogen sulfide monitoring methods
2017 OpenHours
- December 4th: Data Loggers for Environmental Monitoring
- November 13th: Barnraising sessions continued
- October 2nd: Collaborations in disaster response between online and on the ground groups
- September 11th: Summer of Code 2017
- August 7th: Problem Identification
- July 10th: Aerial Mapping
- June 5th: Facilitation Techniques and Resources
- May 1st: Art in Environmental Science Advocacy
- April 3rd: Fundraising for Projects
- March 6th: Water Water Everywhere! A discussion of monitoring strategies and tools
- February 6th: New Year, New Challenges: the shifting landscape of advocacy
- January 9th: Classifying Waste
2016 OpenHours
- December 5th: Environmental monitoring methods recognized by enforcement bodies
- November 7th: New contributors to open source code
- October 3rd: Such Activities, Very Replication!
- September 6th: Google Summer of Code Projects
- August 1st: Public Comment on Environmental Issues
- July 7th: Learning about the Barnraising in Val Verde!
- June 6th: Exploring Proof
- May 2nd: Public Lab's research culture
- April 4th: Open Access to Environmental Data
- March 7th: Soil and Soil Testing
- February 1st: Landfills: Mapping and Monitoring!
- January 28th: Live Call on QGIS
2015 OpenHours
- December 7th: The Oil Testing Kit!
- November 2nd: Gearing up for the Barnraising
- October 20th, Live Call: Calibration and Characterization of DIY Instrumentation
- October 5th: Formaldehyde and the Plant Remediation Experiment
- September 9th: "Transparency in Environmental Policy and Science."
- August 3rd, Mapping in the Middle of it!
- July 6th: Open Air Projects
- June 1st: Public Lab Web Development behind the code
- May 4th: Public Lab's 5 year anniversary party!
- Monday, April 6th: Learning
- March 2nd: Engaging in "C" Science
- February 2nd: Lending Libraries
- January: Energy!
2014 OpenHours
- December 1st:Public Lab: A year in review and what's coming next.
- November 18th: the Water Hackathon in New Orleans
- November 3rd: Gearing up for the Barnraising!
- October 6th: Events and Event Hosting
- September 1st: Open Topic Session
- August 4th: Thermal Imaging
- July 28th: Open Air: air pollutants and air quality monitoring tools
- July 21st: Water Contaminants and Detection
- July 14, 2014: Spectral Analysis
- July 7, 2014: Near Infrared Photography
- June 30th, 2014: Aerial Mapping
Want to connect outside OpenHour? Join an Open Call
Open Calls are a great way to connect with fellow Public Labbers on projects and ideas. They are designed to help you connect with fellow Public Labbers to brainstorm, share ideas and move forward on projects. These calls hosted every Tuesday at 3pm ET (2 central) and are Public Lab community. More information can be found here.
|
Revert |
|